D-Link DES-3526DC Product Manual - Page 179
IGMP Snooping Group, IGMP Snooping Table window, Parameter, Description, VLAN ID
View all D-Link DES-3526DC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual IGMP Snooping Group IGMP Snooping allows the Switch to read the Multicast Group IP address and the corresponding MAC address from IGMP packets that pass through the Switch. The number of IGMP reports that were snooped is displayed in the Reports field. To view the IGMP Snooping Table, click IGMP Snooping Group in the Monitoring menu: Figure 8- 17. IGMP Snooping Table window The user may search the IGMP Snooping Table by VLAN ID (VID) by entering the VID in the top left hand corner and clicking Search. NOTE: The Switch supports up to 128 IGMP Snooping groups. The following field can be viewed: Parameter Description VLAN ID Multicast Group MAC Address Queries Reports Port Map The VLAN ID (VID) of the multicast group. The IP address of the multicast group. The MAC address of the multicast group. A read-only field showing the status of the Querier State. Disabled implies that the Switch is not transmitting IGMP Snooping Query packets, while Enabled means those packets are being transmitted. The total number of reports received for this group. These are the ports where the IGMP packets were snooped are displayed. NOTE: To configure IGMP snooping for the DES-3500 Series switches, go to the Configuration folder and select IGMP. Configuration and other information concerning IGMP snooping may be found in Section 6 of this manual under IGMP. 165