D-Link DES-3526DC Product Manual - Page 63
MST Configuration Table, Current MST Configuration Identification
View all D-Link DES-3526DC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual MST Configuration Table The following screens in the MST Configuration Table window allow the user to configure a MSTI instance on the Switch. These settings will uniquely identify a multiple spanning tree instance set on the Switch. The Switch initially possesses one CIST or Common Internal Spanning Tree of which the user may modify the parameters for but cannot change the MSTI ID for, and cannot be deleted. To view the Current MST Configuration Identification window, click Configuration > Spanning Tree > MST Configuration Table: Figure 6- 23. Current MST Configuration Identification window The window above contains the following information: Parameter Description Configuration Name Revision Level MSTI ID VID List A previously configured name set on the Switch to uniquely identify the MSTI (Multiple Spanning Tree Instance). If a configuration name is not set, this field will show the MAC address to the device running MSTP. This field can be set in the STP Bridge Global Settings window. This value, along with the Configuration Name will identify the MSTP region configured on the Switch. This field can also be set in the STP Bridge Global Settings window. This field shows the MSTI IDs currently set on the Switch. This field will always have the CIST MSTI, which may be configured but not deleted. Clicking the hyperlinked name will open a new window for configuring parameters associated with that particular MSTI. This field displays the VLAN IDs associated with the specific MSTI. Clicking the Add button will reveal the following window to configure: Figure 6- 24. Instance ID Settings window - Add The user may configure the following parameters to create a MSTI in the Switch. Parameter Description MSTI ID Type VID List (1-4094) Priority (0-61440) Enter a number between 1 and 15 to set a new MSTI on the Switch. Create is selected to create a new MSTI. No other choices are available for this field when creating a new MSTI. This field is used to specify the VID range from configured VLANs set on the Switch. Supported VIDs on the Switch range from ID number 1 to 4094. Select a value between 0 and 61440 to specify the priority for a specified MSTI for forwarding packets. The lower the value, the higher the priority. This entry must be divisible by 4094. Click Apply to implement changes made. 49