D-Link DES-3526DC Product Manual - Page 50
Link Aggregation Settings window - Modify, Parameter, Description, Group ID, State
View all D-Link DES-3526DC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual Figure 6- 10. Link Aggregation Settings window - Modify The user-changeable parameters are as follows: Parameter Description Group ID State Master Port Member Ports Flooding Port Active Port Type Select an ID number for the group, between 1 and 6. Trunk groups can be toggled between Enabled and Disabled. This is used to turn a port trunking group on or off. This is useful for diagnostics, to quickly isolate a bandwidth intensive network device or to have an absolute backup aggregation group that is not under automatic control. Choose the Master Port for the trunk group using the pull-down menu. Choose the members of a trunked group. Up to eight ports per group can be assigned to a group. A trunking group must designate one port to allow transmission of broadcasts and unknown unicasts. Shows the port that is currently forwarding packets. This pull-down menu allows you to select between Static and LACP (Link Aggregation Control Protocol). LACP allows for the automatic detection of links in a Port Trunking Group. After setting the previous parameters, click Apply to allow your changes to be implemented. Successfully created trunk groups will be show in the Current Link Aggregation Group Entries table as seen in Figure 6-8. 36