D-Link DES-3526DC Product Manual - Page 147

xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual Figure 7- 17. Enable Method List - Edit window Figure 7- 18. Enable Method List - Add window To define an Enable Login Method List, set the following parameters and click Apply: Parameter Description Method List Name Method 1, 2, 3, 4 Enter a method list name defined by the user of up to 15 characters. The user may add one, or a combination of up to four of the following authentication methods to this method list: • local_enable - Adding this parameter will require the user to be authenticated using the local enable password database on the Switch. The user in the next section entitled Local Enable Password must set the local enable password. • none - Adding this parameter will require an authentication to access the Switch. • radius - Adding this parameter will require the user to be authenticated using the RADIUS protocol from a remote RADIUS server. • tacacs - Adding this parameter will require the user to be authenticated using the TACACS protocol from a remote TACACS server. • xtacacs - Adding this parameter will require the user to be authenticated using the XTACACS protocol from a remote XTACACS server. • tacacs+ - Adding this parameter will require the user to be authenticated using the TACACS protocol from a remote TACACS server. • server_group - Adding a previously configured server group will require the user to be authenticated using a user-defined server group previously configured on the Switch. Local Enable Password This window will configure the locally enabled password for the Enable Admin command. When a user chooses the "local_enable" method to promote user level privileges to administrator privileges, he or she will be prompted to enter the password configured here that is locally set on the Switch. To view the following window, click Security Management > Access Authentication Control > Local Enable Password: 133