D-Link DES-3526DC Product Manual - Page 192
Reset System, Reset Config, Reboot Device, Logout, Reset System window
View all D-Link DES-3526DC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual Reset System In addition, the Reset System option is added to reset all configuration parameters to their factory defaults, save these parameters to the Switch's non-volatile RAM, and then restart the Switch. This option is equivalent to Reset Config followed by Save Changes. Reset Config Figure 9- 11. Reset System window The Reset Config option will reset all of the Switch's configuration parameters to their factory defaults, without saving these default values to the Switch's non-volatile RAM. If the Switch is reset with this option enabled, and Save Changes is not executed, the Switch will return to the last saved configuration when rebooted. Reboot Device Figure 9- 12. Reset Config window The following window is used to restart the Switch. All of the configuration information entered from the last time Save Changes was executed will be lost. Click the Reboot button to restart the Switch. Logout Figure 9- 13. Reboot window Use the Logout page to logout of the Switch's Web-based management agent by clicking on the Log Out button. Figure 9- 14. Logout Web Setup window 178