D-Link DES-3526DC Product Manual - Page 93

xStack DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual Time Zone and DST The following are windows used to configure time zones and Daylight Savings time settings for SNTP. Open the Configuration folder, then the SNTP folder and click on the Time Zone and DST link, revealing the following window. Figure 6- 56. Time Zone and DST Settings window The following parameters can be set: Parameter Description Time Zone and DST Settings Daylight Saving Time State Use this pull-down menu to enable or disable the DST Settings. Daylight Saving Time Offset in Minutes Use this pull-down menu to specify the amount of time that will constitute your local DST offset - 30, 60, 90, or 120 minutes. Time Zone Offset from GMT in +/HH:MM Use these pull-down menus to specify your local time zone's offset from Greenwich Mean Time (GMT.) DST Repeating Settings Using repeating mode will enable DST seasonal time adjustment. Repeating mode requires that the DST beginning and ending date be specified using a formula. For example, specify to begin DST on Saturday during the second week of April and end DST on Sunday during the last week of October. From: Which Day Enter the week of the month that DST will start. From: Day of Week Enter the day of the week that DST will start on. From: Month Enter the month DST will start on. From: time in HH:MM Enter the time of day that DST will start on. To: Which Day Enter the week of the month the DST will end. 79