D-Link DIR-506L SharePort Go User Manual - Page 17
Installation, First Time Setup - d link setup
View all D-Link DIR-506L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Section 2 - Installation Installation First Time Setup 1. Make sure the battery is installed properly (see page 7). Connect the USB cable to the DIR-506L and then connect to a USB port on your computer. It is strongly recommended to charge the battery at least four hours before using. LAN LAN ON OFF ON - 5V + OFF 5V 2. Push the power button to the on position and wait until the power SharePort LED turns green. 3. By default the DIR-506L is in Router mode and must be connected wirelessly with a computer or mobile device to set up. 4. Using a wireless computer or mobile device, launch your wireless utility and connect to the DIR-506L. The default Wi-Fi Network Name (SSID) is dlink_DIR-506L and the Wi-Fi Password is left blank (no security). D-Link DIR-506L User Manual 13