D-Link DIR-506L SharePort Go User Manual - Page 31
PPPoE - ip address
View all D-Link DIR-506L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Section 3 - Configuration If you selected PPPoE, you will see the following settings. Your ISP will provide you with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. Address Mode: Select Static IP if your ISP assigned you an IP address, subnet mask, gateway and DNS server address. In most cases, select Dynamic IP. IP Address: Enter the IP address (for static PPPoE only). Username: Enter your PPPoE user name. Password: Enter your PPPoE password and then retype the password in the next box. Service Name: Enter the ISP service name (optional). Reconnect Mode: Select either Always-on, On-Demand, or Manual. Maximum Idle Enter a maximum idle time during which the Internet Time: connection is maintained during inactivity. To disable this feature, set the Reconnect Mode to Always on. Primary/ Secondary DNS Enter the primary and secondary DNS server addresses Server: (Static PPPoE only). MTU: If you experience connection issues, you may need to change the MTU setting for optimal performance with your specific ISP. 1492 is the default MTU. MAC Address: If your ISP requires you to enter a MAC address, enter it here. You can click the Clone Your Pc's MAC Address button to copy your current computer's MAC address. D-Link DIR-506L User Manual 27