D-Link DIR-506L SharePort Go User Manual - Page 32
If you selected - d link ip address
View all D-Link DIR-506L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Section 3 - Configuration If you selected PPTP, you will see the following settings. Your ISP will provide you with a username and password. Address Mode: Select Static if your ISP assigned you an IP address, subnet mask, gateway and DNS server address. In most cases, select Dynamic. PPTP IP Address: Enter the IP address (Static PPTP only). PPTP Subnet Enter the primary and secondary DNS server addresses Mask: (for static PPTP only). PPTP Gateway IP Address: Enter the gateway IP address provided by your ISP. PPTP Server IP Address: Enter the server IP provided by your ISP. Username: Enter your PPTP username. Password: Enter your PPTP password and then retype the password in the next box. Reconnect Mode: Select either Always-on, On-Demand, or Manual. Maximum Idle Enter a maximum idle time during which the Internet Time: connection is maintained during inactivity. To disable this feature, set the Reconnect Mode to Always on. Primary/ Secondary DNS The DNS server information will be supplied by your ISP Server: (Internet Service Provider.) MTU: If you experience connection issues, you may need to change the MTU setting for optimal performance with your specific ISP. 1492 is the default MTU. D-Link DIR-506L User Manual 28