Dell 1600n Multifunction Mono Laser Printer Dell Laser Multi-Function Printer - Page 23
Connecting the Multi-Function Printer to the Network, or hub
View all Dell 1600n Multifunction Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
To connect the multi-function printer to a computer: 1. Make sure the multi-function printer, computer, and any other attached devices are powered off and unplugged. 2. Connect a USB cable to the USB connector on your multi-function printer. 3. Connect the other end of the cable into an available USB port on the computer, not the USB keyboard. Connecting the Multi-Function Printer to the Network 1. Make sure the multi-function printer, computer, and any other attached devices are powered off and unplugged. 2. Connect one end of a standard category 5 Unshielded Twisted Pair (UTP) network cable into a LAN drop or hub, and the other end into the Ethernet network port on the back of the multi-function printer. The multi-function printer automatically adjusts for the network speed. NOTE: After connecting the multi-function printer, you need to configure the network parameters on the operator panel. See page 147 .