Dell 2335dn User Guide - Page 24

Page 24 of 52 4. Press Scroll ( or ) to display the country you want and then press Select ( ). 5. Press Cancel ( ) to return to the Standby mode. Power Save Mode The Power Save mode enables your printer to reduce power consumption when it is not in actual use. You can enable this mode by selecting the duration for which the printer waits after a job is printed before it switches to a reduced power state. 1. Press Scroll ( or ) to highlight Setup and then press Select ( ). 2. Press Scroll ( or ) to highlight Machine Setup and then press Select ( ). 3. Press Scroll ( or ) to highlight Print Power Save and press Select ( ). 4. Press Scroll ( or ) to display the time settings you want. The available options are 5, 10, 15, 30, 60 and 120 (minutes). The factory default setting is 30 minutes. 5. Press Select ( 6. Press Cancel ( ) to save the selection. ) to return to the Standby mode. Setting the Time and Date The time and date are printed on all faxes. NOTE: It may be necessary to reset the correct time and date if loss of power to the printer occurs. To set the time and date: 1. Press Scroll ( or ) to highlight Setup and then press Select ( ). 2. Press Scroll ( or ) to highlight Machine Setup and then press Select ( ). 3. Press Scroll ( or ) to highlight Date & Time and then press Select ( ).