Dell 2335dn User Guide - Page 5

of 52 - scan manager

Page 5 highlights

telephone line corda setup diagram Page 5 of 52 terminatord Product Information Guide a. The appearance of the power cord and the telephone line cord may differ according to your country's specifications. b. The DRIVERS AND UTILITIES CD contains Dell printer drivers, Scan drivers, Printer Settings Utility, Set IP, Macintosh driver, Linux driver, Dell Toner Management System, Dell ScanCenter, PaperPort® and an HTML User's Guide. c. Owner's Manual may not be provided with your product depending on your country. d. This item is only provided in some countries. NOTE: Use the telephone line cord supplied with your printer. You can also use AWG#26 or lower gauge cord that is less than 250 cms in length. NOTE: The power cord must be plugged into a grounded power socket. 3. Save the carton and packing material in case the printer needs to be repacked. 4. Remove the packing tape from the front, back and, sides of the printer. 5. Remove the label completely from the scanner module by gently pulling it. The scan unlock switch should move forward to the unlock position as the label is pulled out.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

a.
The appearance of the power cord and the telephone line cord may differ according to your country's
specifications.
b.
The
DRIVERS AND UTILITIES CD
contains Dell printer drivers, Scan drivers, Printer Settings Utility, Set
IP, Macintosh driver, Linux driver, Dell Toner Management System, Dell ScanCenter, PaperPort
®
and an
HTML User's Guide.
c.
Owner's Manual may not be provided with your product depending on your country.
d.
This item is only provided in some countries.
3.
Save the carton and packing material in case the printer needs to be repacked.
4.
Remove the packing tape from the front, back and, sides of the printer.
5.
Remove the label completely from the scanner module by gently pulling it. The scan unlock switch
should move forward to the unlock position as the label is pulled out.
telephone line cord
a
setup diagram
terminator
d
Product Information Guide
NOTE:
Use the telephone line cord supplied with your printer. You can also use AWG#26 or lower
gauge cord that is less than 250 cms in length.
NOTE:
The power cord must be plugged into a grounded power socket.
Page 5 of 52