Dell 3115 Color Laser User Guide - Page 101

CAUTION: Do not us sion cords or power strips. CAUTION: multifunction printer should not be plugged into a UPS system 2. Turn on t er and the multifunction printer. Print and Check the System Settings Page Print a system settings page to the network connection. This page also provides important infor that helps you configure for network printing. NOTE: Depending on the network configurat ultifunction printer may not be provided an IP address imme If the System Settings page does not show an assigned IP addres five minutes and try again. 1. Press until >SETUP nd then press . 2. Press until >Rep appears, and then press . 3. System Settings is displayed. Press . The system settings page is 4. If the IP address shows an ther than 0.0.0.0 (the fa fault) or 169.254.xx.xx, th nction printer has an IP address assigned and stored. Go to "Verify the IP Settings(See 6.)." Assign an IP Address NOTE: When you assign an IP address manually in IPv6 Mode, use the Dell Configuration Web Tool. To open the nter Configuration Web Tool, use the link