Dell 3115 Color Laser User Guide - Page 219
IPX/SPX, IP Filter IPv4, ialize NVM, Disable the IP Filter feature for Fil
View all Dell 3115 Color Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 219 highlights
1 Only displayed when an l multi-protocol card is installed on the printer and ional wireless printer adapter is not installed on th IPX/SPX Purpos To configure the IPX/SPX tings for the wired network. The change becomes effective af printer is turned off and then on again. Value Auto* Automatically sets the frame type. Ethernet II Uses the Et frame type. hernet 802.3 Uses the IEEE802.3 fr . Ethernet 802.2 Uses the IEEE802.2 frame ty Ethernet SNAP Use the SNAP frame type. NOTE: The I menu is only displayed when an optiona -protocol card is installed on the printer and the option ss printer adapter is not installed on the card. IP Filter (IPv4) Purpose: specify that data received from certain IP addresses t e wired network is blocked. You can set up to five IP a. The change becomes effective after the printer is turned d then on again. Values: Filter*1 No. n/Address (n is 1-5.) Sets the IP address for Filter n No. n (n is 1-5.) Sets the mask for Filter n. No (n is 1-5.) Off* Disable the IP Filter feature for Fil n. Accept Accepts an access from specified IP address. Reject Rejects an access cified IP address. *1 item is only available for LPD or Port9100. ialize NVM Purpose: To initialize wired network data stored in NVM. After execut function and rebooting the printer, all wired network settings set to their default values.