Dell 3115 Color Laser User Guide - Page 182

 Load only one size and type of print media single print job.  To he best possible print quality, use only high-quality print media designed for use in laser printers. For more guidelines on print med "Print Media Guidelines(See 9.)."  Do not add or remove print media when there i print media in the multipurpose feeder or when the multifunction p rinting from the multipurpose feeder. This may result in a paper j  Print media should be loaded with mended print side down and the top of the print media going into the pose feeder first.  Do not place objects on the multipurpos lso, avoid pressing down or applying excessive force on it.  Do not remove while a job is printing from the multipurpose feeder or Printing is displayed on the operator panel. result in a paper jam. s on the multipurpose feeder identify how to load the multipurpos with paper, and how to turn an envelope for printing. Linking Trays Tray linking allows you to load e size and type of print media in multiple sources. The multifunctio r automatically links the source/trays and will use the first tray un runs out, then switch to the linked tray. If you load the same size print media in each tray, the print media is the same type in order to link the trays. When the selected re loaded with the same size and type of print media, select the Paper Type settings in the Tray Settings for each source. To disable ing, set the Paper Type t que value in each one of the trays. If all trays do not have the sam f print media when linked, you could mistakenly print a job on the wr er type. Using the Duplex Duplex printing (or two-sided printing) a o print on both sides of a sheet of paper. For sizes that are acc for duplex printing, see "Print Media S Support(See 9.)." Duplex printing is only available when the optio exer is installed on the multifunction printer. For information on ho tall the duplexer, see "Installing a D(See 8.)." Using Booklet Print