Dell 3115 Color Laser User Guide - Page 303

5. ss the b until V27ter+V29+V33+V17 appears, the the enable V.17 (14,400bps), select V27ter+V29 to enable V.29 (9,600bps), or select V27ter to enable V.27ter (4,800bps). Fax Data Encoding Method Some of t y fax devices do not support the JBIG data encoding method. You may ce fax send or receive errors due to this data encoding method. You le the JBIG and select the MH, MR or MMR encoding with the followin tions. You c the modem transmission encoding with the following instructions. 1. When the printer Customer Mode, select ax/Scanner Diag and press button. 2. Press the button until Parameter appears, then the 3. Press the button until eter appears, then press the button. 4. Press the utton until G3M TX Coding appears, s the . 5. Press the button until MMR appears, then press the button to enable MMR encoding, select MR to enable MR encoding, or select MH to enable MH encoding. You can change the modem receive encoding with the following ins. 1. When the is in Customer Mode, select Fax/Scanner Diag and press button. 2. Press the button until Parameter appea press the button. 3. Press the button until FAX Parameter appears, then press the button. 4. Press the button until G3M RX Coding then press the button. 5. Press the button until MMR appears, then press the button to enable MMR encoding, se MR to enable MR encoding, or select MH to enable MH encoding. Sending a Fax You can fax om you multifunction printer. Also you can directly fax data transf om the computer running Windows. Loading an Original Document use the ADF or the document feeder glass to load an original docume axing. Using the ADF, you can load up to 50 sheets of 75 g/m2 (20 l at a time. Using the document feeder glass, you can load one sheet e. Ensure that no document is in the ADF. If any document ted in the ADF, it has priority