Dell 3115 Color Laser User Guide - Page 187

stem settings page lists all the options you purchased or install ature or an option is not listed, you need to check your installa 1. Press until >SETUP appears, and then press . 2. Press until >Reports appears, and then press . 3. Settings is displayed. Press . The system se ge is printed. 4. Verify that ons you installed are correctly listed under ions. 5. I tion you installed is not listed, turn off the multifunction printe the power cord, and reinstall the option. 6. Verify the amount of mem alled is correctly listed under General Using th or Panel to Change System Settings You can select menu items and corresponding values from the operato When you first enter the print from the operator panel, you see an asterisk (*) next to a value nus. F efaults may vary for different countries. Th risk indicates the factory default menu setting. These settings are nal system settings. NOTE: Factory defaults m or different countries. When you select a new setting from the operator pa asterisk appears next to the setting to identify it as the current ault menu setting. These settings are active until new ones cted or the factory defaults are restored. To select a new value as a setting: 1. Press until >SETUP appears hen press 2. or until the desired me and then press . 3. Press , , , or until red menu or menu item appears, and then press .  If the selection is a menu, the menu is opened and the first system in the menu appears.  If the sel s a menu item, the default menu setting for the menu item appears. urrent user default menu setting has an asterisk (*) beside it.) Each menu item has a list s for the menu item. A value can be: