Dell 3115 Color Laser User Guide - Page 350

 Use only recommended edia. See "Print Media Guidelines(See 9.) for more information.  See "Loading Print Media in Stand Optional Trays(See 10.)" and "Loading ipurpose Feeder(See 10.)" to load printer media properly.  Do n oad the print media sources. Ensure the stack print media height do ceed the maximum height indicated by the load line labels in the  Do not load wrinkled, creased, damp, or curled print .  Flex, fan, and straighten media before you load it. If a jam occurs with print media, tr g one sheet at a time through the multipurpose feeder.  not use print media that you have cut or trimmed yourself.  Do not mix print media sizes, weights, or in the same print media source.  Ensure the recommended print side is face up when you ins nt media. However, the recommended print side should be face down the multipurpose feeder.  Keep print red in an acceptable environment. For more information, see "Storing Print Media(See 9.)".  Do not remove the feeding t a print job.  Push all firmly after loading them.  Ensure a s that connect to the multifunction printer are correctly attached.  Overtightening the g cause jams.  Wipe the feeder rollers trays or multipurpose feeder with a cloth that is slightly dampened ter if jams caused by misfeeding paper occur frequently. Identifyin cation of Paper Jams The fo llustration shows where paper jams may occur along the print media p