Dell 3115 Color Laser User Guide - Page 65
the protocol., TCP/IP and NetBEUI can be selected simultaneously
![]() |
View all Dell 3115 Color Laser manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Ethernet*1 t Auto Settings Detects Ethernet transmission the duplex settings automatically. 10BASET f-Duplex Selects 10Base-T Half-Duplex as the default value. 10BASET FullDuplex Selects 10Base-T Full-Duplex as the default value 10 lfDuplex Selects 100Base-T Half-Duplex as the default value. 100B Duplex Selects 100Base-T Full-Duplex as the default value. Cu rnet Settings Displays the current settings of Ethernet. MAC Addr D the printer's MAC address. Port Status LPD Port9100 Select the ch enable the LPD. Select the check box to enable the Port I*2 Sel ck box to enable the IPP port. WSD Select the check box to enable the WSD p F Sel ck box to enable the FTP port. SMB*2 NetWare*2 Select the check box to enable the SMB. You can also configure the transport pr o be used. TCP/IP and NetBEUI can be selected simultaneously as the protocol. Select ck box to enable the NetWare port. You can also configure the transp ocol to be used. IPX/SPX and TCP/IP can be selected simultaneously nsport protocol. AppleTalk*2 Select the check box to enable the AppleTalk jour (mDNS)*2 Select the check box to enable the Bonjour(mDNS) feature. E-Mail Alert Select the check box to enable the E-Mail Alert
![](/manual_guide/products/dell-3115-color-laser-user-guide-7889d46/65.png)