Dell 3115 Color Laser User Guide - Page 169

 Do not mix print media sizes, weights, or types i ame source. This may result in a paper jam.  Do not remove trays while a job is or Printing is displayed o erator panel.  re the Paper Type settin ct. (See "Tray Settings(See 13.)" f led information about these settings.)  Ensure the paper is properly loaded tray.  Flex paper back and forth, en fan them. Straighten the edges of the stack on a level surface. Selecting Preprinted Forms and Lett When selecting preprinted forms and d paper for the multifunction printer:  Use grain long papers for best results.  Use only forms and letterhead printed using an offs graphic or engraved printing process.  Select papers that absorb ink, but do not blee  Avoid papers with rough or heavily surfaces.  Use papers printed w -resistant inks designed for use in xerographic copiers. The ink must nd temperatures of 225°C (437°F) without melting or releas dous emissions.  Use inks ot affected by the resin in toner or the silicone in the fuser uni that are oxidation-set or oil-based should meet these requirements; ks might not. If you are in doubt, contact your paper supplier. Pri Letterhead Check with the manufacturer or ve determine whether the pre-printed letterhead you have selected is ac for laser printers. Page orientation is important when printing on ld. Use the following table for help when loading letterhead in the p a sources. Print media source side e orientation