Dell E515dn Dell Multifunction Printer Users Guide - Page 216
Print the Network Configuration Report, Con Your Mail Server Settings Using Web Based Management
View all Dell E515dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
authentication with the SNTP time server. (This is not the time displayed on the machine's LCD.) You can automatically or manually synchronize the machine's time with the Coordinated Universal Time (UTC) provided by the SNTP time server. Print the Network Configuration Report The Network Configuration Report lists the current network configuration, including the network print server settings. NOTE: Node Name: The Node Name appears on the current Network Configuration Report. The default Node Name is "DELLxxxxxx" (where "xxxxxx" is your machine's MAC Address / Ethernet Address.) NOTE: If the IP Address on the Network Configuration Report shows 0.0.0.0, wait for one minute and try printing it again. NOTE: You can find your machine's settings, such as IP address, subnet mask, node name, and MAC Address on the report, for example: • IP address: 192.168.0.5 • Subnet mask: 255.255.255.0 • Node name: DELL000499 • MAC Address: 00-0c-a0-00-04-99 1. Press Menu. 2. Do one of the following: • Dell E515dn/E515dw Press p or q to display the Print Reports option, and then press OK. • Dell E514dw Press p or q to display the Machine Info. option, and then press OK. 3. Press p or q to select the Network Config option, and then press OK. 4. Press Start. Configure Your Mail Server Settings Using Web Based Management Use Web Based Management to configure your Dell machine to connect with your mail server. 1. Start your web browser. 2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address). For example: http://192.168.1.2 3. No password is required by default. Type a password if you have set one, and then click . 4. Click the Network tab. 5. Click Protocol in the left navigation bar. 6. In the POP3/IMAP4/SMTP field, click Advanced Setting and make sure the Status is Enabled. 216 Network