Dell E515dn Dell Multifunction Printer Users Guide - Page 345
WPS w/PIN Code, View the SSID of the Group Owner.
View all Dell E515dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 345 highlights
WLAN Wi-Fi Direct Network Reset TCP/IP WLAN Assistant Setup Wizard WPS/AOSS WPS w/PIN Code WLAN MAC Address Set to Default WLAN Enable Push Button PIN Code Manual Group Owner Device Info. Status Info. I/F Enable - Boot Method IP Address Subnet Mask Gateway Node Name WINS Config WINS Server DNS Server APIPA IPv6 - - - Status Signal SSID Comm. Mode - - Device Name SSID IP Address Status Signal - Select the BOOT method that best suits your needs. Enter the IP address. Enter the Subnet mask. Enter the Gateway address. Enter the Node name. (Up to 32 characters) Select the WINS configuration mode. Specify the IP address of the primary or secondary WINS server. Specify the IP address of the primary or secondary DNS server. Set the machine to automatically allocate the IP address from the link-local address range. Turn the IPv6 protocol on or off. Configure your wireless network settings using the Dell CDROM. Configure your internal print server manually. Configure your wireless network settings using the onebutton push method. Configure your wireless network settings using WPS with a PIN. View the current wireless network status. View the current wireless network signal strength. View the current SSID. View the current Communication Mode. View the MAC address of the machine. Restore the wireless network setting to the factory setting. Turn the WLAN on or off manually. Configure your Wi-Fi Direct™ network settings using the one-button push method. Configure your Wi-Fi Direct™ network settings using WPS with a PIN code. Configure your Wi-Fi Direct™ network settings manually. Set your machine as the Group Owner. View the device name of your machine. View the SSID of the Group Owner. When the machine is not connected, LCD displays Not Connected. View the current IP Address of your machine. View the current Wi-Fi Direct™ network status. View the current Wi-Fi Direct™ network signal strength. When your machine acts as Group Owner, the LCD always indicate a strong signal. Turn the Wi-Fi Direct™ connection on or off. Restore all network settings back to the factory settings. Machine Settings 345