Dell Inspiron 14 5410 2-in-1 Service Manual - Page 14
Steps, Removing and installing components
View all Dell Inspiron 14 5410 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Steps 1. Remove the four screws (M2x4) that secure the base cover to the palm-rest and keyboard assembly. 2. Loosen the three captive screws that secure the base cover to the palm-rest and keyboard assembly. NOTE: Upon loosening the three captive screws, the base cover will open up creating a gap between the base cover and the palm-rest assembly. 3. Starting from the top-left corner, pry the base cover to release the base cover from the palm-rest and keyboard assembly. 14 Removing and installing components
Steps
1.
Remove the four screws (M2x4) that secure the base cover to the palm-rest and keyboard assembly.
2.
Loosen the three captive screws that secure the base cover to the palm-rest and keyboard assembly.
NOTE:
Upon loosening the three captive screws, the base cover will open up creating a gap between the base cover
and the palm-rest assembly.
3.
Starting from the top-left corner, pry the base cover to release the base cover from the palm-rest and keyboard assembly.
14
Removing and installing components