Dell Inspiron 14 5410 2-in-1 Service Manual - Page 33

Speakers, Removing the speakers

Get Dell Inspiron 14 5410 2-in-1 PDF manuals and user guides View all Dell Inspiron 14 5410 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Steps 1. Remove the screw (M1.6x2.5) that secures the solid-state drive bracket to the palm-rest and keyboard assembly. 2. Turn the solid-state drive bracket at an angle of 180 degrees. 3. Insert the solid-state drive bracket into the other solid-state drive bracket slot on the palm-rest and keyboard assembly. 4. Replace the screw (M1.6x2.5) that secures the solid-state drive bracket to the palm-rest and keyboard assembly. 5. Align the notch on the solid-state drive with the tab on the solid-state drive slot. 6. Slide the solid-state drive firmly into the solid-state drive slot at an angle. 7. Replace the screw (M2x3) that secures the solid-state drive to the solid-state drive bracket. 8. Adhere the tape that secures the antenna cable to the solid-state drive. Next steps 1. Install the base cover. 2. Exit Service Mode. 3. Follow the procedure in After working inside your computer. Speakers Removing the speakers Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. About this task The following image indicates the location of the speakers and provides a visual representation of the removal procedure. Steps 1. Disconnect the speaker cable from the system board. Removing and installing components 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Steps
1.
Remove the screw (M1.6x2.5) that secures the solid-state drive bracket to the palm-rest and keyboard assembly.
2.
Turn the solid-state drive bracket at an angle of 180 degrees.
3.
Insert the solid-state drive bracket into the other solid-state drive bracket slot on the palm-rest and keyboard assembly.
4.
Replace the screw (M1.6x2.5) that secures the solid-state drive bracket to the palm-rest and keyboard assembly.
5.
Align the notch on the solid-state drive with the tab on the solid-state drive slot.
6.
Slide the solid-state drive firmly into the solid-state drive slot at an angle.
7.
Replace the screw (M2x3) that secures the solid-state drive to the solid-state drive bracket.
8.
Adhere the tape that secures the antenna cable to the solid-state drive.
Next steps
1.
Install the
base cover
.
2.
Exit
Service Mode
.
3.
Follow the procedure in
After working inside your computer
.
Speakers
Removing the speakers
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the
battery
.
About this task
The following image indicates the location of the speakers and provides a visual representation of the removal procedure.
Steps
1.
Disconnect the speaker cable from the system board.
Removing and installing components
33