Dell Inspiron 14 5410 2-in-1 Service Manual - Page 37
Install the, Follow the procedure
View all Dell Inspiron 14 5410 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Steps 1. Align the screw holes on the heat sink with the screw holes on the system board. 2. In sequential order (as indicated on the heat sink), tighten the four or seven captive screws that secure the heat sink to the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. 3. Exit Service Mode. Removing and installing components 37
Steps
1.
Align the screw holes on the heat sink with the screw holes on the system board.
2.
In sequential order (as indicated on the heat sink), tighten the four or seven captive screws that secure the heat sink to the
system board.
Next steps
1.
Install the
base cover
.
2.
Follow the procedure in
After working inside your computer
.
3.
Exit
Service Mode
.
Removing and installing components
37