Dell Inspiron 14 5410 2-in-1 Service Manual - Page 50
Power button with optional fingerprint reader
View all Dell Inspiron 14 5410 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Power button with optional fingerprint reader Removing the power button with optional fingerprint reader Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Enter Service Mode. 3. Remove the base cover. 4. Remove the fan. 5. Remove the display assembly. 6. Remove the I/O board. About this task The following image indicates the location of the power button with optional fingerprint reader and provides a visual representation of the removal procedure. Fingerprint-reader cable is optional and is available only on the computers that are shipped with fingerprint reader configuration. Steps 1. Remove the two screws (M1.6x2) that secure the power button to the palm-rest and keyboard assembly. 2. Lift the power button, along with the optional fingerprint-reader cable, off the slot on the palm-rest and keyboard assembly. Installing the power button with optional fingerprint reader Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following image indicates the location of the power button with optional fingerprint reader and provides a visual representation of the removal procedure. Fingerprint-reader cable is optional and is available only on the computers that are shipped with fingerprint reader configuration. 50 Removing and installing components