Dell Inspiron 14 5410 2-in-1 Service Manual - Page 27
Solid-state drive, Removing the M.2 2280 solid-state drive
View all Dell Inspiron 14 5410 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Table 2. Antenna-cable color scheme Connectors on the wireless card Antenna-cable color Auxiliary Black Silkscreen marking AUX ▲ (black triangle) 2. Align the notch on the wireless card with the tab on the wireless-card slot and insert the wireless card at an angle into the wireless-card slot. 3. Align the screw hole on the wireless-card bracket with the screw hole on the wireless card and palm-rest and keyboard assembly. 4. Replace the screw (M2x3) that secures the wireless-card bracket to the wireless card and system board. 5. Adhere the tape that secures the antenna cable to the wireless-card bracket. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. 3. Exit Service Mode. Solid-state drive Removing the M.2 2280 solid-state drive Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Enter Service Mode. 3. Remove the base cover. About this task The following image indicates the location of the M.2 2280 solid-state drive and provides a visual representation of the removal procedure. Removing and installing components 27