Dell Inspiron 14 5410 2-in-1 Service Manual - Page 51

System board, Removing the system board

Get Dell Inspiron 14 5410 2-in-1 PDF manuals and user guides View all Dell Inspiron 14 5410 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

Steps 1. Align and place the power button, along with the optional fingerprint-reader cable, on the slot of the palm-rest and keyboard assembly. 2. Align the screw holes on the power button with the screw holes on the palm-rest and keyboard assembly. 3. Replace the two screws (M1.6x2) that secure power button to the palm-rest and keyboard assembly. Next steps 1. Install the I/O board. 2. Install the display assembly. 3. Install the fan. 4. Install the base cover. 5. Follow the procedure in After working inside your computer. 6. Exit Service Mode. System board Removing the system board Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. 4. Remove the memory modules. 5. Remove the wireless card. 6. Remove the M.2 2230 solid-state drive or M.2 2280 solid-state drive, whichever applicable. 7. Remove the heat sink. 8. Remove the fan. About this task The following image indicates the connectors on your system board. Removing and installing components 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Steps
1.
Align and place the power button, along with the optional fingerprint-reader cable, on the slot of the palm-rest and keyboard
assembly.
2.
Align the screw holes on the power button with the screw holes on the palm-rest and keyboard assembly.
3.
Replace the two screws (M1.6x2) that secure power button to the palm-rest and keyboard assembly.
Next steps
1.
Install the
I/O board
.
2.
Install the
display assembly
.
3.
Install the
fan
.
4.
Install the
base cover
.
5.
Follow the procedure in
After working inside your computer
.
6.
Exit
Service Mode
.
System board
Removing the system board
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the
battery
.
4.
Remove the
memory modules
.
5.
Remove the
wireless card
.
6.
Remove the
M.2 2230 solid-state drive
or
M.2 2280 solid-state drive
, whichever applicable.
7.
Remove the
heat sink
.
8.
Remove the
fan
.
About this task
The following image indicates the connectors on your system board.
Removing and installing components
51