Dell Inspiron 14 5410 2-in-1 Service Manual - Page 35
Heat sink, Removing the heat sink
![]() |
View all Dell Inspiron 14 5410 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Heat sink Removing the heat sink Prerequisites 1. Follow the procedure in Before working inside your computer. CAUTION: For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your skin can reduce the heat transfer capability of the thermal grease. NOTE: The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you touch it. 2. Enter Service Mode. 3. Remove the base cover. About this task The following image indicates the location of the heat sink and provides a visual representation of the removal procedure. NOTE: The number of captive screws and the appearance of the heat sink may vary depending on the configuration you ordered. Removing and installing components 35
![](/manual_guide/products/dell-inspiron-14-5410-2in1-service-manual-da40124/35.png)