Dell Inspiron 14 5410 2-in-1 Service Manual - Page 49
Close the right display hinge., Connect the coin-cell battery cable to the I/O board.
View all Dell Inspiron 14 5410 2-in-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Steps 1. Place the I/O board into the slots on the palm-rest and keyboard assembly. 2. Align the screw hole on the I/O board with the screw hole on the palm-rest and keyboard assembly. 3. Replace the two screws (M2x3) that secures the I/O board to the palm-rest and keyboard assembly. 4. Slide the fingerprint reader-cable into the connector on the I/O board and close the latch to secure the cable. 5. Connect the I/O-board cable to the connector on the I/O board and close the latch to secure the cable. 6. Adhere the tape that secures the I/O-board cable to the I/O board. 7. Connect the coin-cell battery cable to the I/O board. 8. Close the right display hinge. 9. Replace the screw (M2.5x3.5) that secures the right display hinge to the I/O board and palm-rest and keyboard assembly. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. 3. Exit Service Mode. Removing and installing components 49