Dell Latitude C600 Service Manual - Page 18

Memory Module, Removing the Memory Module Cover

Get Dell Latitude C600 PDF manuals and user guides View all Dell Latitude C600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

www.dell.com | support.dell.com 2 Push down on the drive door until it snaps into place. 3 Replace the M3 x 5-mm screw in the hard drive door. Memory Module Memory Module Cover Removing the Memory Module Cover NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer. NOTICE: Read "Preparing to Work Inside the Computer" before performing the following procedure. 1 Remove the memory module cover: a Use a coin or flat-blade screwdriver to release the two captive screws that secure the memory module cover. b Place your finger under the cover at the indentation and lift and slide the cover open. 18 Removi ng and Replacing Parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
18
Removing and Replacing Parts
www.dell.com | support.dell.com
2
Push down on the drive door until it snaps into place.
3
Replace the M3 x 5-mm screw in the hard drive door.
Memory Module
Memory Module Cover
Removing the Memory Module Cover
NOTICE:
Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or
by touching an unpainted metal surface on the computer.
NOTICE:
Read "Preparing to Work Inside the Computer" before performing
the following procedure.
1
Remove the memory module cover:
a
Use a coin or flat-blade screwdriver to release the two captive
screws that secure the memory module cover.
b
Place your finger under the cover at the indentation and lift and
slide the cover open.