Dell Latitude C600 Service Manual - Page 25
Replacing the Keyboard Assembly, Place the keyboard on the palmrest at the front of the computer
View all Dell Latitude C600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Keyboard Connector keyboard flex cable track stick cable 8 Disconnect the keyboard flex cable from the interface connector on the system board assembly by pulling up on the connector. NOTICE: Do not pull on the keyboard flex cable. 9 Remove the keyboard assembly from the bottom case assembly. Replacing the Keyboard Assembly 1 Place the keyboard on the palmrest at the front of the computer with the keys face down and the connector toward the back of the computer. NOTICE: To avoid damage to the connector pins, press the keyboard connector evenly into the interface connector, and do not reverse the keyboard connector. 2 Connect the keyboard flex cable to the interface connector on the system board assembly. 3 Carefully turn the keyboard over and fit the keyboard into place. Removing and Repl aci ng Part s 25