Dell Latitude C600 Service Manual - Page 47

Microprocessor Module, Removing the Microprocessor Module

Get Dell Latitude C600 PDF manuals and user guides View all Dell Latitude C600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

Microprocessor Module Microprocessor Modules NOTICE: Hold the microprocessor down while turning the cam screw to prevent intermittent contact between the cam screw and microprocessor. perpendicular screwdriver ZIF socket cam screw lock pin-1 corner processor die (do not touch) perpendicular screwdriver ZIF socket cam screw lock pin-1 corner processor die (do not touch) type I ZIF socket type II ZIF socket Removing the Microprocessor Module NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer. NOTICE: Read "Preparing to Work Inside the Computer" before performing the following procedure. 1 Remove the hard drive. 2 Remove the keyboard assembly. NOTICE: To ensure maximum cooling for the microprocessor, do not touch the heat transfer areas on the thermal cooling assembly. The oils in your skin reduce the heat transfer capability of the thermal pads. Removing and Repl aci ng Part s 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
Removing and Replacing Parts
47
Microprocessor Module
Microprocessor Modules
NOTICE:
Hold the microprocessor down while turning the cam screw to
prevent intermittent contact between the cam screw and microprocessor.
Removing the Microprocessor Module
NOTICE:
Disconnect the computer and any attached devices from electrical
outlets, and remove any installed batteries.
NOTICE:
To avoid ESD, ground yourself by using a wrist grounding strap or
by touching an unpainted metal surface on the computer.
NOTICE:
Read "Preparing to Work Inside the Computer" before performing
the following procedure.
1
Remove the hard drive.
2
Remove the keyboard assembly.
NOTICE:
To ensure maximum cooling for the microprocessor, do not touch
the heat transfer areas on the thermal cooling assembly. The oils in your skin
reduce the heat transfer capability of the thermal pads.
ZIF socket
cam screw
pin-1 corner
type I ZIF socket
lock
perpendicular
screwdriver
processor die
(do not touch)
ZIF socket
cam screw
pin-1 corner
lock
type II ZIF socket
processor die
(do not touch)
perpendicular
screwdriver