Dell PowerEdge R340 EMC PowerEdge R340 Installation and Service Manual - Page 39
Recommended tools, Front bezel, Removing the optional front bezel
![]() |
View all Dell PowerEdge R340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Recommended tools You need the following tools to perform the removal and installation procedures: • Key to the bezel lock The key is required only if your system includes a bezel. • Phillips #1 screwdriver • Phillips #2 screwdriver • Torx #T15 screwdriver • Plastic scribe • 1/4 inch flat blade screwdriver • Wrist grounding strap connected to the ground • ESD mat Front bezel Removing the optional front bezel Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. NOTE: The bezel key is part of the bezel package. Steps 1. Unlock the bezel. 2. Press the release button, and remove the left end of the bezel. 3. Slide the tabs on the right end of the bezel out of the slots on the chassis and remove the bezel. Figure 13. Removing the optional front bezel Installing the optional front bezel Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. Installing and removing system components 39
![](/manual_guide/products/dell-poweredge-r340-emc-poweredge-r340-installation-service-manual-224efca/39.png)