Dell PowerEdge R340 EMC PowerEdge R340 Installation and Service Manual - Page 52
Installing a 2.5 inch drive into the 3.5 inch drive adapter
View all Dell PowerEdge R340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Figure 29. Removing a 2.5-inch drive from the 3.5-inch drive adapter Next steps 1. Install a 2.5-inch drive into the 3.5-inch drive adapter. Installing a 2.5 inch drive into the 3.5 inch drive adapter Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. If installed, remove the front bezel. 3. Remove the drive carrier. Steps 1. Align the screw holes on the 2.5-inch drive with the screw holes on the 3.5-inch drive adapter. 2. Using a Phillips #1 screwdriver, install the screws to secure the drive to the 3.5-inch drive adapter. 52 Installing and removing system components
Figure 29. Removing a 2.5-inch drive from the 3.5-inch drive adapter
Next steps
1.
Install a 2.5-inch drive into the 3.5-inch drive adapter
.
Installing a 2.5 inch drive into the 3.5 inch drive adapter
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
2.
If installed,
remove the front bezel
.
3.
Remove the drive carrier
.
Steps
1.
Align the screw holes on the 2.5-inch drive with the screw holes on the 3.5-inch drive adapter.
2.
Using a Phillips #1 screwdriver, install the screws to secure the drive to the 3.5-inch drive adapter.
52
Installing and removing system components