Dell PowerEdge R340 EMC PowerEdge R340 Installation and Service Manual - Page 61

Installing the expansion card riser

Get Dell PowerEdge R340 PDF manuals and user guides View all Dell PowerEdge R340 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

Figure 38. Installing the expansion card riser filler Next steps 1. Replace the expansion card riser. Installing the expansion card riser Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in the Before working inside your system. 3. If applicable, install the expansion card in the expansion card riser. 4. Open the expansion card riser latch. Steps 1. If applicable, remove the expansion card riser filler bracket by performing the following steps: a. Open the blue expansion card retention latch lock. b. Using a Phillips #2 screwdriver, remove the screw securing the expansion card riser filler to the system board. c. Slide the expansion card riser filler bracket up and out of the system. Installing and removing system components 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
Figure 38. Installing the expansion card riser filler
Next steps
1.
Replace the expansion card riser
.
Installing the expansion card riser
Prerequisites
1.
Follow the safety guidelines listed in the
Safety instructions
.
2.
Follow the procedure listed in the
Before working inside your system
.
3.
If applicable,
install the expansion card in the expansion card riser
.
4.
Open the expansion card riser latch.
Steps
1.
If applicable, remove the expansion card riser filler bracket by performing the following steps:
a.
Open the blue expansion card retention latch lock.
b.
Using a Phillips #2 screwdriver, remove the screw securing the expansion card riser filler to the system board.
c.
Slide the expansion card riser filler bracket up and out of the system.
Installing and removing system components
61