Dell PowerEdge R340 EMC PowerEdge R340 Installation and Service Manual - Page 41
Installing the system cover
![]() |
View all Dell PowerEdge R340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Figure 15. Removing the system cover Next steps 1. Replace the system cover. Installing the system cover Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in the Before working inside your system. 3. Ensure that all internal cables are connected and placed out of the way, and no tools or extra parts are left inside the system. Steps 1. Align the tabs on the system cover with the guide slots on the chassis. 2. Close the system cover release latch. 3. Using a 1/4 inch flat head or Phillips #2 screwdriver, turn the lock clockwise to the lock position. Installing and removing system components 41
![](/manual_guide/products/dell-poweredge-r340-emc-poweredge-r340-installation-service-manual-224efca/41.png)
Figure 15. Removing the system cover
Next steps
1.
Replace the system cover
.
Installing the system cover
Prerequisites
1.
Follow the safety guidelines listed in the
Safety instructions
.
2.
Follow the procedure listed in the
Before working inside your system
.
3.
Ensure that all internal cables are connected and placed out of the way, and no tools or extra parts are left inside the system.
Steps
1.
Align the tabs on the system cover with the guide slots on the chassis.
2.
Close the system cover release latch.
3.
Using a 1/4 inch flat head or Phillips #2 screwdriver, turn the lock clockwise to the lock position.
Installing and removing system components
41