Dell PowerEdge R340 EMC PowerEdge R340 Installation and Service Manual - Page 66

Installing the PERC card

Get Dell PowerEdge R340 PDF manuals and user guides View all Dell PowerEdge R340 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 66 highlights

Figure 45. Removing the PERC card Next steps 1. Replace the PERC card. Installing the PERC card Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure listed in the Before working inside your system. 3. Remove the expansion card riser. Steps 1. Connect the PERC cable to the PERC card. 2. Flip and insert the PERC card in the connector on the system board. 3. Press the tab on the blue release latch to disengage it from the slot on the chassis. 4. Rotate the blue release latch until it locks with the PERC card. 5. Secure the blue release latch with a screw. 66 Installing and removing system components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
Figure 45. Removing the PERC card
Next steps
1.
Replace the PERC card
.
Installing the PERC card
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
2.
Follow the procedure listed in the
Before working inside your system
.
3.
Remove the expansion card riser
.
Steps
1.
Connect the PERC cable to the PERC card.
2.
Flip and insert the PERC card in the connector on the system board.
3.
Press the tab on the blue release latch to disengage it from the slot on the chassis.
4.
Rotate the blue release latch until it locks with the PERC card.
5.
Secure the blue release latch with a screw.
66
Installing and removing system components