Dell PowerEdge R340 EMC PowerEdge R340 Installation and Service Manual - Page 43
Installing the air shroud
View all Dell PowerEdge R340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Figure 17. Removing the air shroud Next steps 1. Replace the air shroud. Installing the air shroud Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure listed in Before working inside your system. Steps 1. Align the slot on the air shroud with the standoff on the chassis. NOTE: Route the cable properly to prevent the cable from being pinched or crimped. 2. Lower the air shroud into the system until it is firmly seated. Figure 18. Installing the air shroud Next steps 1. Follow the procedure listed in After working inside your system. Installing and removing system components 43
Figure 17. Removing the air shroud
Next steps
1.
Replace the air shroud
.
Installing the air shroud
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
2.
Follow the procedure listed in
Before working inside your system
.
Steps
1.
Align the slot on the air shroud with the standoff on the chassis.
NOTE:
Route the cable properly to prevent the cable from being pinched or crimped.
2.
Lower the air shroud into the system until it is firmly seated.
Figure 18. Installing the air shroud
Next steps
1.
Follow the procedure listed in
After working inside your system
.
Installing and removing system components
43