Dell PowerEdge R940 EMC Installation and Service Manual - Page 105
DCPMM installation guidelines
![]() |
View all Dell PowerEdge R940 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Table 46. Supported NVDIMM-N for quad processor configurations (continued) Configuration Description Memory population rules RDIMMs Configuration 10 24x 16 GB RDIMMs, 6x NVDIMM-Ns Processor1 {A1, 2, 3, 4, 5, 6}, Processor2 {B1, 2, 3, 4, 5, 6} Processor3 {C1, 2, 3, 4, 5, 6} Processor4 {D1, 2, 3, 4, 5, 6} NVDIMM-N Processor1 {A7, 8, 9} Processor2 {B7, 8, 9} Configuration 11 24x 32 GB RDIMMs, 6x NVDIMM-Ns Processor1 {A1, 2, 3, 4, 5, 6}, Processor2 {B1, 2, 3, 4, 5, 6}, Processor3 {C1, 2, 3, 4, 5, 6} Processor4 {D1, 2, 3, 4, 5, 6} Processor1 {A7, 8, 9} Processor2 {B7, 8, 9} Configuration 12 42x 32 GB RDIMMs, 6x NVDIMM-Ns Processor1 {A1, 2, 3, 4, 5, 6, 7, 8, Processor1 {A10,11,12} 9}, Processor2 {B10, 11, 12} Processor2 {B1, 2, 3, 4, 5, 6, 7, 8, 9} Processor3 {C1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12} Processor4 {D1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12} Configuration 13 24x 16 GB RDIMMs, 12x NVDIMM-Ns Processor1 {A1, 2, 3, 4, 5, 6}, Processor2 {B1, 2, 3, 4, 5, 6}, Processor3 {C1, 2, 3, 4, 5, 6} Processor4 {D1, 2, 3, 4, 5, 6} Processor1 {A7, 8, 9, 10, 11, 12}, Processor2 {B7, 8, 9, 10, 11, 12} Configuration 14 24x 32 GB RDIMMs, 12x NVDIMM-Ns Processor1 {A1, 2, 3, 4, 5, 6}, Processor2 {B1, 2, 3, 4, 5, 6}, Processor3 {C1, 2, 3, 4, 5, 6} Processor4 {D1, 2, 3, 4, 5, 6} Processor1 {A7, 8, 9, 10, 11, 12}, Processor2 {B7, 8, 9, 10, 11, 12} Configuration 15 36x 32 GB RDIMMs, 12x NVDIMM-Ns Processor1 {A1, 2, 3, 4, 5, 6}, Processor2 {B1, 2, 3, 4, 5, 6}, Processor3 {C1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12} Processor 4 {D1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12} Processor1 {A7, 8, 9, 10, 11, 12}, Processor2 {B7, 8, 9, 10, 11, 12} DCPMM installation guidelines The following are the recommended guidelines for installing data center persistent memory module (DCPMM) memory modules: • Each system supports maximum of one DCPMM memory module per channel. NOTE: If two different DCPMM capacities are mixed, an F1/F2 warning is displayed as the configuration is not supported. • DCPMM can be mixed with RDIMM, LRDIMM, and 3DS LRDIMM. • Mixing of DDR4 DIMM types (RDIMM, LRDIMM, and 3DS LRDIMM), within channels, for Integrated Memory Controller (iMC), or across sockets are not supported. • Mixing of DCPMM operating modes (App Direct, Memory Mode) is not supported. • If only one DIMM is populated on a channel, it should always go to the first slot in that channel (white slot). • If a DCPMM and a DDR4 DIMM are populated on the same channel, always plug DCPMM on second slot (black slot). • If the DCPMM is configured in Memory Mode, the recommended DDR4 to DCPMM capacity ratio is 1:4 to 1:16 per iMC. • DCPMMs' cannot be mixed with other DCPMMs capacities or NVDIMMs. • Mixing different capacities of RDIMMs and LRDIMMs are not allowed when DCPMM is installed. • DCPMMs of different capacities are not allowed. Installing and removing system components 105
![](/manual_guide/products/dell-poweredge-r940-emc-installation-service-manual-9de4cf2/105.png)