Dell PowerEdge R940 EMC Installation and Service Manual - Page 123
Expansion cards and expansion card risers, Expansion card installation guidelines
View all Dell PowerEdge R940 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Figure 73. Installing the PEM power board Next steps 1. Holding the PEM handle, lower the PEM until it firmly seats in place. 2. Install the air shroud. 3. Follow the procedure listed in After working inside your system on page 66. Expansion cards and expansion card risers Expansion card installation guidelines Depending on your system configuration, the following PCI Express (PCIe) generation 3 expansion cards are supported: Table 50. Expansion card riser configurations Riser PCIe slot on the expansion card riser Processor connection PCIe slots on riser (Height) Riser 2 (IO_RISER2) Slot 8 Slot 9 Slot 10 Processor 3 Processor 3 Processor 3 full height full height full height Riser 3 (IO_RISER3) Slot 11 Slot 12 Slot 13 Processor 4 Processor 4 Processor 4 full height full height full height PCIe slots on riser (length) 3/4 length half length half length 3/4 length half length half length Link width x16 x16 x16 x16 x16 x16 NOTE: The expansion card slots are not hot-swappable. Slot width x16 x16 x16 x16 x16 x16 Installing and removing system components 123