Dell PowerEdge R940 EMC Installation and Service Manual - Page 67
Installing the optional front bezel
![]() |
View all Dell PowerEdge R940 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Steps 1. Unlock the bezel by using the bezel key. 2. Press the release button, and pull the left end of the bezel. 3. Unhook the right end, and remove the bezel. Figure 21. Removing the optional front bezel with the LCD panel Next steps Install the optional front bezel. Installing the optional front bezel Prerequisites Follow the safety guidelines listed in Safety instructions on page 65. Steps 1. Locate and remove the bezel key. NOTE: The bezel key is part of the LCD bezel package. 2. Align and insert the right end of the bezel onto the system. 3. Press the release button and fit the left end of the bezel onto the system. 4. Lock the bezel by using the key. Installing and removing system components 67
![](/manual_guide/products/dell-poweredge-r940-emc-installation-service-manual-9de4cf2/67.png)
Steps
1.
Unlock the bezel by using the bezel key.
2.
Press the release button, and pull the left end of the bezel.
3.
Unhook the right end, and remove the bezel.
Figure 21. Removing the optional front bezel with the LCD panel
Next steps
Install the optional front bezel
.
Installing the optional front bezel
Prerequisites
Follow the safety guidelines listed in
Safety instructions
on page 65.
Steps
1.
Locate and remove the bezel key.
NOTE:
The bezel key is part of the LCD bezel package.
2.
Align and insert the right end of the bezel onto the system.
3.
Press the release button and fit the left end of the bezel onto the system.
4.
Lock the bezel by using the key.
Installing and removing system components
67