Dell PowerEdge R940 EMC Installation and Service Manual - Page 68
System cover, Removing the system cover
![]() |
View all Dell PowerEdge R940 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Figure 22. Installing the optional front bezel with the LCD panel System cover Removing the system cover Prerequisites 1. Follow the safety guidelines listed in Safety instructions on page 65. 2. Power off the system, including any attached peripherals. 3. Disconnect the system from the electrical outlet and disconnect the peripherals. Steps 1. Using a 1/4 inch flat head or a Phillips #2 screwdriver, rotate the latch release lock counter clockwise to the unlocked position. 2. Lift the latch till the system cover slides back and the tabs on the system cover disengage from the guide slots on the system. 3. Hold the cover on both sides, and lift the cover away from the system. 68 Installing and removing system components
![](/manual_guide/products/dell-poweredge-r940-emc-installation-service-manual-9de4cf2/68.png)
Figure 22. Installing the optional front bezel with the LCD panel
System cover
Removing the system cover
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
on page 65.
2.
Power off the system, including any attached peripherals.
3.
Disconnect the system from the electrical outlet and disconnect the peripherals.
Steps
1.
Using a 1/4 inch flat head or a Phillips #2 screwdriver, rotate the latch release lock counter clockwise to the unlocked position.
2.
Lift the latch till the system cover slides back and the tabs on the system cover disengage from the guide slots on the system.
3.
Hold the cover on both sides, and lift the cover away from the system.
68
Installing and removing system components