Dell PowerEdge T340 EMC Installation and Service Manual - Page 41
Front bezel, Removing the front bezel
![]() |
View all Dell PowerEdge T340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
• Key to the bezel lock The key is required only if your system includes a bezel. • Phillips #1 screwdriver • Phillips #2 screwdriver • 5mm hex nut screwdriver • Plastic scribe • Wrist grounding strap connected to the ground • ESD mat Front bezel Removing the front bezel Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Keep the bezel key handy. Steps 1. Unlock the bezel. 2. Press the blue release latch at the top of the bezel to release the bezel from the system. 3. Unhook the bezel tabs from the slots at the bottom, and lift the bezel. Figure 17. Removing the front bezel Next steps 1. Replace the front bezel. Installing the front bezel Prerequisites 1. Follow the safety guidelines listed in Safety instructions. Installing and removing system components 41
![](/manual_guide/products/dell-poweredge-t340-emc-installation-service-manual-ae8a62c/41.png)