Dell PowerEdge T340 EMC Installation and Service Manual - Page 68

Installing the drive backplane

Get Dell PowerEdge T340 PDF manuals and user guides View all Dell PowerEdge T340 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 68 highlights

Figure 45. Removing the drive backplane Next steps 1. Replace a drive backplane. 2. Follow the procedure listed in After working inside your system. Installing the drive backplane Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure listed in Before working inside your system. 3. Remove the front bezel.. 4. Remove the air shroud. 5. Remove all the drives. Steps 1. Align the slots on the backplane with the hooks on the system. 2. Lower the drive backplane into the system until the release pin locks in place, securing the drive backplane to the system. 3. Connect the data, signal, and power cables to the backplane. 68 Installing and removing system components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
Figure 45. Removing the drive backplane
Next steps
1.
Replace a drive backplane.
2.
Follow the procedure listed in
After working inside your system
.
Installing the drive backplane
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
2.
Follow the procedure listed in
Before working inside your system
.
3.
Remove the front bezel.
.
4.
Remove the air shroud.
5.
Remove all the drives.
Steps
1.
Align the slots on the backplane with the hooks on the system.
2.
Lower the drive backplane into the system until the release pin locks in place, securing the drive backplane to the system.
3.
Connect the data, signal, and power cables to the backplane.
68
Installing and removing system components