Dell PowerEdge T340 EMC Installation and Service Manual - Page 44
Caster wheels – optional, Removing caster wheels
View all Dell PowerEdge T340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Figure 20. Installing the system feet Next steps 1. Place the system upright on a flat, stable surface, and rotate the system feet outward. 2. Follow the procedure listed in After working inside your system. Caster wheels - optional Removing caster wheels Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Place the system on its side on a flat, stable surface. Steps 1. Using the Phillips #2 screwdriver, loosen the captive screw that secures the front wheel unit to the base of the system. 2. Push the front wheel unit toward the rear of the system to release the retention hooks, and pull out the front wheel unit. 3. Loosen the screw that secures the back wheel unit to the base of the system. 4. Push the rear wheel unit toward the front of the system to release the retention hooks, and pull out the rear wheel unit. 44 Installing and removing system components