Dell PowerEdge T340 EMC Installation and Service Manual - Page 46
System cover, Removing the system cover
![]() |
View all Dell PowerEdge T340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Figure 21. Installing caster wheels Next steps 1. Follow the procedure listed in After working inside your system. System cover Removing the system cover Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Power off the system and all attached peripherals. 3. Disconnect the system from the electrical outlet and disconnect the peripherals. 4. Place the system on a flat, stable surface. 5. Remove the front bezel. Steps 1. Use a 1/4-inch flat head or a Phillips #2 screwdriver to turn the cover release latch counterclockwise to the unlock position. 2. Press the cover release latch, and remove the system cover. 46 Installing and removing system components
![](/manual_guide/products/dell-poweredge-t340-emc-installation-service-manual-ae8a62c/46.png)
Figure 21. Installing caster wheels
Next steps
1.
Follow the procedure listed in
After working inside your system
.
System cover
Removing the system cover
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
2.
Power off the system and all attached peripherals.
3.
Disconnect the system from the electrical outlet and disconnect the peripherals.
4.
Place the system on a flat, stable surface.
5.
Remove the front bezel.
Steps
1.
Use a 1/4-inch flat head or a Phillips #2 screwdriver to turn the cover release latch counterclockwise to the unlock position.
2.
Press the cover release latch, and remove the system cover.
46
Installing and removing system components