Dell PowerEdge T340 EMC Installation and Service Manual - Page 42
System feet, Removing the system feet
View all Dell PowerEdge T340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
2. Locate and remove the bezel key. NOTE: The bezel key is part of the bezel package. Steps 1. Align and insert the bezel tabs into the slots in the system. 2. Press the release latch, and push the bezel toward the system until the bezel locks into place. 3. Lock the bezel. Figure 18. Installing the front bezel System feet Removing the system feet Prerequisites NOTE: It is recommended that you remove the system feet only when you are replacing the system feet with the wheel assembly. 1. Follow the safety guidelines listed in Safety instructions.. 2. Place the system on its side on a flat, stable surface. 3. Rotate the system feet inward. Steps 1. Using the Phillips #2 screwdriver, remove the screw that secures the foot to the base of the system. 2. Repeat the preceding step to remove the remaining system feet. 42 Installing and removing system components