Dell PowerEdge T340 EMC Installation and Service Manual - Page 59
Removing a 3.5-inch drive adapter from a 3.5-inch drive carrier
![]() |
View all Dell PowerEdge T340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Figure 35. Installing a 2.5-inch drive into the 3.5-inch drive adapter Next steps 1. Replace a 3.5-inch adapter into the 3.5-inch drive carrier. 2. Follow the procedure listed in After working inside your system. Removing a 3.5-inch drive adapter from a 3.5-inch drive carrier Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure listed in Before working inside your system. 3. Remove the 3.5-inch drive carrier from the system. Steps 1. Remove the screws from the rails on the drive carrier. 2. Lift the 3.5 inch drive adapter out of the drive carrier. Installing and removing system components 59
![](/manual_guide/products/dell-poweredge-t340-emc-installation-service-manual-ae8a62c/59.png)
Figure 35. Installing a 2.5-inch drive into the 3.5-inch drive adapter
Next steps
1.
Replace a 3.5-inch adapter into the 3.5-inch drive carrier.
2.
Follow the procedure listed in
After working inside your system
.
Removing a 3.5-inch drive adapter from a 3.5-inch drive
carrier
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
2.
Follow the procedure listed in
Before working inside your system
.
3.
Remove the 3.5-inch drive carrier from the system.
Steps
1.
Remove the screws from the rails on the drive carrier.
2.
Lift the 3.5 inch drive adapter out of the drive carrier.
Installing and removing system components
59