Dell PowerEdge T340 EMC Installation and Service Manual - Page 48
Air shroud, Removing the air shroud
![]() |
View all Dell PowerEdge T340 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Figure 23. Installing the system cover Next steps 1. Place the system upright on its feet on a flat, stable surface. 2. Install the front bezel. 3. Reconnect the peripherals, and connect the system to the electrical outlet. 4. Power on the system and all attached peripherals. Air shroud Removing the air shroud Prerequisites CAUTION: Never operate your system with the air shroud removed. The system may get overheated quickly, resulting in shutdown of the system and loss of data. 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure listed in Before working inside your system. 3. Remove the system cover. Steps Holding the blue touch points, lift the air shroud out of the system. 48 Installing and removing system components
![](/manual_guide/products/dell-poweredge-t340-emc-installation-service-manual-ae8a62c/48.png)